Weighbridge software

Weighbridge software in Kenya that reads the scale, prints the ticket and posts to your ERP.

KiloSahihi is industrial weighing software for weighbridges, factories, farms, quarries, mines and bulk-material operations across Kenya and East Africa. It connects the weighing indicators you already have to digital transactions, vehicle identification, ERP systems and automated weighbridge controls. It runs on the PC at the bridge: the weight comes in from the indicator over the serial or network port, so nobody types a figure; the ticket prints on the spot; the transaction posts to your ERP; and the bridge keeps weighing when the internet does not.

weighing operations
100+
weights typed by hand
0
with or without internet
24/7

How a weighing runs

One truck, two weights, one ticket.

The same cycle whether an operator runs it or the driver self-serves.

  1. 1

    Vehicle identified

    The registration is typed, picked from the pending list, or read by an ANPR camera. Supplier, customer and commodity are chosen from lists pulled from your ERP, so names match on both sides.

  2. 2

    First weight captured

    The software waits for the indicator to report a stable reading and locks it. The figure on the ticket is the figure on the indicator, to the division.

  3. 3

    Load or offload

    The pending transaction stays open on the dashboard. Twin-bridge sites can weigh in on one bridge and out on the other.

  4. 4

    Second weight and net

    Gross, tare and net are computed from the two readings. Mixed loads weigh in sequence and each commodity gets its own line from the bridge's own deltas.

  5. 5

    Ticket printed

    Thermal or A4, with your logo, the ticket number, both weights, the time of each, the operator and, with cameras, a photo of the truck on the bridge.

  6. 6

    Posted downstream

    The transaction lands in your ERP, the cloud dashboard, or both. Reports, stock and invoices all use the number captured at the scale.

What you get

Everything a weighbridge or truck scale office needs.

Weigh-in / weigh-out

First weight, tare and net on any weighbridge or truck scale, with the ticket printed on the spot.

Reads the indicator directly

Avery Weigh-Tronix ZM303, ZM305 and ZM510, Keli, XK3190 and other serial or network indicators. Stability is checked before a weight is accepted.

Twin, multi-deck, axle and rail

Two bridges as one lane, multi-deck bridges summed per deck, axle-by-axle weighing with EAC configurations and overload checks, and rail wagons by wagon number.

RFID, ANPR and position sensors

The vehicle identified from its tag or plate, and the reading accepted only when sensors confirm it is fully on the deck.

Fraud detection at the edge

Edge AI on the bridge checks the declared material against the overview camera and scores every tare against the vehicle's own history, before the ticket prints and with no cloud round-trip.

Calibration-due alerts

Verification and calibration dates per bridge, alerts before they lapse, and drift reports from routine test-weight checks.

Windows, web and mobile

The station on Windows, supervision in the browser, clerks and drivers on the phone app. One record whichever device it came from.

Works offline

The bridge runs on its own database. Cloud sync and ERP posting queue up and drain when the connection returns. Nothing is lost and nothing posts twice.

Audit trail

Every manual entry, edit and void is recorded with who, when and why. Manual weights are flagged on every ticket and report.

Operator Assist

A returning truck is recognised from its plate and its last transaction recalled: trailer, driver, account, commodity and tare. The operator confirms instead of re-typing.

Biometric operator login

Fingerprint sign-in ties every weighing to the operator who took it. The ticket shows who captured each weight and who printed it.

Tickets and reports

Weigh tickets on A4, thermal or dot-matrix printers, daily and shift summaries, per-customer and per-commodity totals, scheduled Excel and PDF reports, and reprints from the record marked as duplicates.

ERP integration

Posts to Sage X3, Microsoft Dynamics 365, Odoo, SAP and in-house systems as each transaction completes.

Cameras and gate hardware

ANPR cameras, overview cameras, boom barriers and traffic lights are wired into the weighing cycle, not bolted on beside it.

Multi-site dashboard

Every bridge and collection centre in one cloud dashboard, hosted by you or by us, with live feeds, shift reports and payments.

Your existing bridge

Built for the weighbridge you already have.

KiloSahihi does not require a new weighbridge, new load cells or a new indicator. It runs on a Windows PC connected to the indicator you already use, and most sites are weighing within a day of installation. If the indicator is old or the cable is unreliable, we supply and fit one, but that is a hardware decision, not a software requirement.

The same software serves a single manned station and a fully unmanned multi-lane site. Automation is added in stages by switching on features and adding hardware, so a site never has to migrate to a different system as it grows.

  • Runs on standard Windows PCs at the bridge
  • Serial, USB-serial and network indicators
  • Single, twin, multi-deck and axle weighbridges
  • Thermal receipt and A4 ticket printers

Where we work

Kenya, Uganda, Tanzania and beyond.

KiloSahihi is built and supported from Nairobi by AEA Limited (Avery East Africa), and runs on weighbridges and truck scales across Kenya, Uganda, Tanzania, South Sudan and the Democratic Republic of the Congo: breweries, fuel depots, quarries, cement plants, tea and coffee factories, packhouses and cooperative collection centres. Installation and commissioning are done on site by our own engineers, and support is a phone call or a WhatsApp message away in English, Kiswahili or French.

  • Installed and commissioned on site
  • Support in English, Kiswahili and French
  • Hardware supplied through KiloShop when needed
  • One system across all your sites and countries

Accuracy you can defend

The number on the ticket is the number on the bridge.

Most weighbridge losses come from the office, not the load cells: a weight typed in wrong, a tare reused from last week, a ticket voided after the truck left. KiloSahihi removes the typing entirely, records a photograph with each weighing where cameras are fitted, and writes every edit, void and manual entry to an audit log that managers can review from anywhere.

Manual weighing exists for the day a cable fails, but it is a licensed, role-controlled feature, and every manual weight is marked as such on the ticket, the report and the ERP posting.

Everything the software does

From a manned bridge to the whole operation.

One system, switched on in stages. Each page describes one part of it in the detail a buyer needs.

Weighbridge automation

Business systems

Industries

Questions

Frequently asked

What is weighbridge software?
Software that captures vehicle weights from a weighbridge indicator, computes gross, tare and net, prints the weigh ticket and records the transaction against a vehicle, supplier or customer and commodity. Good weighbridge software also reports on the day's traffic, keeps an audit trail and posts each transaction to the business's ERP.
Does it work with my existing weighbridge and indicator?
Yes. KiloSahihi reads the indicator you already have over its serial or network port. It supports Avery Weigh-Tronix, Keli, XK3190 and other common indicators, and we add protocols where needed.
Does the weighbridge need internet?
No. Weighing, tickets and reports run entirely on the PC at the bridge. Cloud dashboards, SMS and ERP posting use the connection when it is there and catch up when it returns.
Which ERPs can it post to?
Sage X3, Microsoft Dynamics 365, Odoo, SAP and in-house systems with an API. See the ERP integration page for how posting and master data work.
Is this weighbridge software or truck scale software?
Both. Weighbridge is the term used in East Africa and truck scale the term used elsewhere for the same platform scale that weighs a whole vehicle. KiloSahihi works with either name on the tin, and with axle scales and multi-deck bridges too.
How is it licensed?
Per feature, per station. Weighing, tickets, reports and offline operation are always included. ERP posting, cameras, M-Pesa, cloud dashboards and unmanned automation are switched on as you need them.

Get started

Talk to us

Tell us what you weigh and how your site runs. We'll demo KiloSahihi with your own scenario.