Unmanned weighbridge

A weighbridge that runs itself, one step at a time.

An unmanned weighbridge is not a different product. It is the same KiloSahihi software with cameras, barriers and a driver kiosk taking over the steps an operator used to do. Most sites get there in stages, on the bridge they already own.

Three levels

From a manned weighbridge to a fully unmanned one.

Each level removes work from the operator without changing how the weights are captured or where they go.

1

Fully manned

An operator runs every weighing from the desktop app. The weight comes straight from the indicator, so nothing is typed in wrong. Tickets print, transactions post, the audit log fills. This is where most sites start.

2

Partially unmanned

ANPR cameras identify the truck and pre-fill the transaction. The operator confirms rather than types. Boom barriers and traffic lights hold the queue so only one truck is on the bridge at a time. One operator covers several lanes, or works from an office away from the bridge.

3

Fully unmanned

The driver self-serves at a kiosk. The camera reads the plate, the light turns green, the barrier lifts, the weight is captured when the indicator is stable, the ticket prints at the kiosk and the exit barrier opens. Every weighing can be watched remotely, with photographs, from the cloud dashboard.

Most customers start manned and remove steps as they go. Going unmanned means adding hardware, not replacing the system.

The automated cycle

What happens when nobody is in the office.

  1. 1

    Truck approaches

    The entry light is red and the barrier is down until the bridge is empty and the indicator reads zero. The signal fails safe to red on any power or network loss.

  2. 2

    Plate read and matched

    The ANPR camera reads the registration and the software matches it to a pending transaction, a purchase order from the ERP, or a known vehicle with a stored tare.

  3. 3

    Barrier opens, truck positions

    The light turns green and the barrier lifts. The overview camera confirms the vehicle is fully on the deck before a weight is accepted.

  4. 4

    Weight captured

    The software waits for a stable reading, locks the weight, stores the photographs and stamps the time.

  5. 5

    Ticket at the kiosk

    The driver collects the printed ticket, or the ticket goes to the customer by SMS or email. The transaction is posted to the ERP and the cloud.

  6. 6

    Exit

    The exit barrier opens once the ticket is issued. The bridge resets to zero and the next truck is released.

Hardware

What an unmanned bridge is made of.

ANPR cameras

Read the plate at the entry and, on twin bridges, the exit. Dahua ITC-series cameras are the usual fit.

Overview camera

Photographs the load and proves the truck was on the bridge at the moment of weighing.

Boom barriers and traffic lights

Controlled by the software, not the driver. The bridge is released only when the previous cycle is complete.

Driver kiosk

A weatherproof screen and printer at cab height. The driver confirms the commodity or order and takes the ticket.

Your indicator

The existing indicator keeps reporting the weight. Stability and zero are checked before every capture.

Remote monitoring

Every weighing, with its photographs, appears live on the cloud dashboard for supervisors off site.

Controls

What stays true when there is no operator.

Removing the operator removes the person who used to notice a problem, so the software has to notice instead. A weight is only accepted when the indicator is stable and the vehicle is on the deck. A plate that does not match any pending transaction or order stops the cycle rather than guessing. Every capture stores two photographs, the time and the reading, so any ticket can be checked afterwards.

Manual intervention is still possible from the office, but it is a role-controlled, licensed action that is flagged on the ticket and written to the audit log.

  • Stable-weight and zero checks before every capture
  • Photographs stored with the first and second weight
  • Unmatched plates halt the cycle for review
  • Manual overrides flagged and audited

Questions

Frequently asked

What is an unmanned weighbridge?
A weighbridge where the driver completes the weighing without an operator on site. Cameras identify the vehicle, barriers and lights control the queue, the software captures the weight when it is stable, and the ticket prints at a kiosk. Supervisors monitor remotely.
Do I need to replace my weighbridge to go unmanned?
No. The bridge, load cells and indicator stay. Going unmanned means adding cameras, barriers, lights and a kiosk to the software you already run.
What happens if the camera cannot read a plate?
The cycle stops and the vehicle is flagged for review. A supervisor can complete it from the office with a manual identification, which is recorded as such in the audit log. Dirty or damaged plates are the usual cause and are rare in practice.
Can I watch the bridge remotely?
Yes. The cloud dashboard shows each weighing as it happens with its photographs, weights and ticket, and sends shift reports by email.
How long does it take to automate a bridge?
A manned installation is typically a day. Adding ANPR and barriers is a few days of civil and electrical work plus commissioning. Most sites run partially unmanned for a while before removing the operator entirely.

Get started

Talk to us

Tell us what you weigh and how your site runs. We'll demo KiloSahihi with your own scenario.